STEDI
CAMPBOSS
BROWN DAVIS
CLEARVIEW
MSA 4X4
MAXTRAX
TORQIT
MY COOLMAN
Specifications
Part Number: TL76A4
Capacity: 75 Litres
Filler point: STANDARD
Fuel Supply Method: INDEPENDENT FEED
Tank Location: UNDER MIDDLE OF VEHICLE – DRIVERS SIDE
Fitting time: 5hr/s
Modifications: NONE REQUIRED
Key Features of a Brown Davis Replacement Fuel Tank
- Tapered approach angle to reduce frontal impact and improve ramp over
clearance - Longitudinal and lateral baffling system to prevent fuel slosh and to
strengthen tank structure - Gusseted brackets with double thickness pads to spread tank mounting loads
- Fuel pump sender flange designed to re-use the vehicle’s original equipment
- Swirl pot designed to carrel fuel around the pick-up point
- Roll over check valve and expansion box for fuel expansion and venting
- Fast fill breather for rapid filling and to reduce bowser shut off
- Filler tube, connects to vehicles original filling point
- Cushion clamps to retain fuel lines to prevent damage and kinking
- Magnetic drain plug, horizontal and flush mounted to prevent damage
Independent Feed System
Auxiliary Long Range Fuel Tanks are designed to be fitted as a replacement or
additional fuel tank to exponentially increase a vehicles fuel capacity. A Brown
Davis Long Range Fuel Tank is a great solution for those remote trips where range
is not just necessary but crucial.
This system works by utilising a switch to pick which fuel tank feeds the engine;
main or auxiliary. An LED fuel gauge to monitor the auxiliary fuel level and feed
switch is included. All Brown Davis fuel tanks come with a flush mounted drain
plug for easy draining in the event of contaminated fuel. The tanks come with all
parts and hardware supplied.
Aluminised Steel Long Range Fuel Tanks
Brown Davis Aluminised Steel long range fuel tanks are constructed from 2mm
aluminium coated cold rolled steel, to ensure maximum strength and
durability. This gauge of steel is sufficiently resistant to impact damage
that additional tank guards are not necessary. The aluminium coating on the
specific steelused by Brown Davis, offers the best of both worlds with the
strength of steel and the anti corrosion properties of aluminium.
aluminium coated cold rolled steel, to ensure maximum strength and
durability. This gauge of steel is sufficiently resistant to impact damage
that additional tank guards are not necessary. The aluminium coating on the
specific steelused by Brown Davis, offers the best of both worlds with the
strength of steel and the anti corrosion properties of aluminium.
